Published at Friday, September 14th 2018. by Dorthy Boone in Reclining Sofa.
So now I'm using a one-and-a-half-inch hole saw to drill at the foam, so you want to drill all the way to the wood. So I like to shave off a little off the edge like this. So you don't see a mark when you do pull the fabric on it. So now I'm wrapping the fiber all around the foam area.
So it's a lot easier to work with when you do put the fabric on so I'd like to always thin off the edge. Like this, so you don't see the edge when you do start putting in the fabric on so here's how the pattern looks like we did four pieces of this for the corner and then four pieces again for the middle area and then one piece for the top.
So right now we're going to sew all the sides first, attaching it and then we'll sew the top afterward. So this is how one of the sides look like when it's done so once the sides are all done, we'll be sewing. The top part so I'll be using crystals like this, with the two-pound nylon strings. So the best way is to put two strings into the needle once and then push it down instead of doing one string at a time.
Any content, trademark’s, or other material that might be found on the hollywoodstandups.com website that is not hollywoodstandups.com’s property remains the copyright of its respective owner/s. In no way does hollywoodstandups.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 hollywoodstandups.com. All Rights Reserved.