Published at Tuesday, 28 August 2018. Ottoman Chair. By Hattie Livingston.
When I open the lid or not, and it does work so now - I've determined where to put the holes. This is called a lift hinge that I'm using so now, I'm just drilling all the holes for the buttons you now I'm using heavy form to glue on the edge. So this is the type of foam glue that I'm using and also the spray gun that I'm using this is. The type of foam saw that I'm using to use to cut the phone. Now, I'm using 4-inch medium density foam.
Today, I'm a show you how to poster this round storage Ottoman, so the measurement for each whole side to side is 7 inches and top to bottom is 7 inches. This is all preference on size, so I already drilled two holes on either sides for the hinge and I already put the t-nut already on the other side as well. So this is the type of screws I'm using and this t-nut. So I did a little trial and error using this hinge to see if it works.
Now, I'm using half inch foam like this. Now I'm locking a few staples all around first to see if everything looks perfect and then I'll staple it down now that I'm done stapling all the top part I'll be stapling all the bottom afterwards. Now I'm using black lining for the bottom base, you now I'm using black lining after that I'll be using cardboard to staple and flip the fabric. You you so I'll, be stepping all around the top edge first and then I'll be putting the cardboard so now, marking all where the wood stud is. So when I do put the cardboard it's easy to staple it.
Any content, trademark’s, or other material that might be found on the hollywoodstandups.com website that is not hollywoodstandups.com’s property remains the copyright of its respective owner/s. In no way does hollywoodstandups.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 hollywoodstandups.com. All Rights Reserved.